F14 Zero Cut-Off Setting - SMC Networks PF3A703H-L Operation Manual

■[F14] Zero cut-off setting
When the flow is close to 0 L/min., the product rounds the value and zero will be displayed.
Flow value will be displayed even when the flow rate is 0 L/min. when the pressure is high or depending on
the installation orientation.
Zero cut-off function makes the display zero.
The range to display zero can be changed.
< Operation >
Display [F14] by pressing ▲ or ▼ button in function selection mode.
Select zero cut-off setting
Press the ▲ or ▼ button to select the value of Zero cut-off.
: The display above is an example of when [L] is selected for the PF3A703H (3000 L/min type) with the unit switching function.
: If the flow rate does not reach the above value, the display will be zero.
Example: PF3A703H (3000 L/min type)
Press the S button.
Press the S button to set.
[F14] Zero cut-off setting completed
Select Zero cut-off setting.
Return to function selection mode.
-51-
No.PF※※-OMX0002