[F14] Zero-Cut Setting - SMC Networks PFMC7501-L Operation Manual

■[F14] Zero-cut setting

A function to force the display to zero to remove flickering at the lower measurement range.
<Operation>
Press the UP or DOWN button in function selection mode to display [F14].
Press the SET button. Move on to the setting of the zero cut-off display function.
Setting of zero cut-off function
Press the UP or DOWN button to select the zero cut-off value.
: The display above is an example when [L] is selected in PFMC7501 (500 L/min type) with unit selection function.
Press the SET button to set. Return to function selection mode.
[F14] Zero cut-off setting completed.
-55-
No.PF※※-OMY0002