SMC Networks PF3A703H-L Operation Manual page 40

a. When hysteresis mode is selected
Input of set value
Set the flow based on the setting method on page 35.
The snap shot function can be used. (Refer to page 66)
Setting of Hysteresis
Set the flow based on the setting method on page 35.
The snap shot function can be used. (Refer to page 66)
Setting of delay time
Set delay time.
: Example for 3000 L/min type the above
: The set value and hysteresis settings limit each other.
Press the S button to set.
Press the S button to set.
Press the S button to set.
Select display colour
(Refer to select display colour of page 38.)
Move on to setting of hysteresis.
Move on to setting of delay time.
Move on to select display colour.
-39-
No.PF※※-OMX0002