F14 Zero Cut-Off Setting - SMC Networks PF2M7 Series Operation Manual

■[F14] Zero cut-off setting
Forced display of zero to remove flickering at the lower limit during measurement.
<Operation>
Press the UP or DOWN button in function selection mode to display [F14].
Setting of zero cut-off function
Press the UP or DOWN button to select the zero
cut-off function.
Press the SET button to set.
Check the zero cut-off set value
The set zero cut-off range is displayed in
percent (%).
During the checking of the Zero cut-off set value
Press the UP and DOWN button simultaneously for 1 second or longer for resetting the set
value (to the default value).
Press the SET button to set.
Press the SET button.
[F14] Zero cut-off setting completed
-44-
Move on to the setting of the zero cut-off function.
Move on to checking the zero cut-off set value.
Return to function selection mode.
No.PF※※-OMW0007-A