Error Display - SMC Networks PF3A703H-L Operation Manual

■Error display

Error name Error display
Instantaneous flow
error
Over current error
System error
Accumulated flow
error
Version does not
match
: If the error cannot be reset after the above measures are taken, or errors other than above are displayed, please contact SMC.
Description
Flow rate exceeding the upper limit
of the settable flow range is applied.
The switch output load current is
80 mA or more.
to
An internal data error has occurred.
The accumulated flow has exceeded
the accumulated flow range.
(For accumulated increment)
The accumulated flow has reached
the set accumulated flow.
(For accumulated decrement)
Version of master and IO-Link
does not match.
Reset applied flow rate to a level within
the settable flow range.
Turn the power off and remove the
cause of the over current. Then supply
the power again.
Turn the power off and on again.
If the failure cannot be solved, contact
SMC.
Reset the accumulated flow.
(Press the ▼ and S buttons
simultaneously for 1 second or longer)
Align the master IO-Link version to the
device.
-89-
Measures
No.PF※※-OMX0002