SMC Networks PF3A703H-L Operation Manual page 65

: Measurement mode can return from any setting item by pressing the S button for 2 seconds or longer.
: An increase or decrease in flow will have no effect on the output while the output operation is being performed.
: PD stands for Process data. Refer to page 71 for further details of the PD.
PD diagnostic bit (flow) check
Press the ▲ or ▼ button to select
diagnostic bit (flow) check.
: This function is available with IO-Link communication.
: Refer to page
Press the SET button to set.
PD flow measurement check
Press the ▲ or ▼ button to select
PD flow measurement check.
: This function is available with IO-Link communication.
Press the SET button to set.
[F98] Setting of output check completed
-64-
77 for details of the diagnostic information.
Move on to PD flow
measurement check.
Return to function selection
mode.
No.PF※※-OMX0002