SMC Networks PF3A703H-L Operation Manual page 31

[Window comparator mode]
Set P1L, the lower limit of the switch operation, and P1H, the upper limit of the switch operation, and WH1
(hysteresis) following the instructions given above. (refer to setting method on page 29)
(When reversed output is selected, the main screen displays n1L and n1H.)
[Accumulated output mode]
Set each P1 (set value), referring to the Setting method on page 29.
(When reversed output is selected, the main screen displays n1.)
Refer to the switch output modes list for the relationship between the set values and operation (page 35).
-30-
No.PF※※-OMX0002