■[F90] Setting of all functions
Each time the S button is pressed, the function steps in the order shown in the following table.
<Operation>
Display [F90] by pressing ▲ or ▼ button in function selection mode.
Set all functions
Press the ▲ or ▼ button to select all function settings.
[oFF] (not use) is
selected
Press the S button
to set.
Return to function
selection mode.
[F90] Setting of all functions completed
: Setting of each function
Every time the S button is pressed, the display moves to the next function in order of "Function setting" on page 60.
Set by pressing ▲ and ▼ button.
For details of how to set each function, refer to the relevant setting of function section in this manual.
Press the S button.
-59-
Move on to the suction signal input check.
[on] (use) is selected
※
Setting of functions
Press the
S button for
2 seconds
or longer.
Measurement mode
No.PF※※-OMX0002