SMC Networks PF3A703H-L Operation Manual page 44

d. When accumulated pulse output mode is selected
Select accumulated pulse output
Press the ▲ or ▼ button to select accumulated pulse output.
ｓ
Press the S button to set. Move on to select display colour.
Select display colour
(Refer to select display colour of page 38.)
: When the accumulated pulse output mode is selected, the output operation indicator LED will turn off.
: When flow rate is less than the rated flow range, the accumulated pulse output will not operate.
: When the flow exceeds the maximum display range, the accumulated pulse output will be equivalent to the maximum display value.
-43-
No.PF※※-OMX0002