Table of Contents
Advertisement
Connecting power leads to the Hughes 9502
Chapter 4 • Installation instructions
54
3500834-0001 Revision C
Figure 34: Installing the SIM card
Once the unit is properly installed, you can then connect the power leads (positive +
and negative -) from the power source to the 9502 power connector. The terminal
is clearly marked for positive and negative leads. It is designed for a nominal 12Vdc
and 24Vdc voltage and is protected from reverse polarity. The maximum current
draw is 1.5A at 12V, 0.75A at 24V.
Figure 35: Bottom view cap off
Advertisement
Table of Contents
