Table of Contents
Advertisement
Connections tab
Chapter 2 • Configuration via Web UI
26
3500834-0001 Revision C
Manage Contexts page
The Manage Contexts page under the Connections tab displays the status of any
active contexts and allows contexts to be controlled. Typically this page will not be
used and you configure context activation via the always on option on the M2M
page, or the ACA page.
Note, in NAPT mode the PDP context will NAPT data for all devices on the LAN. The
owner IP address is shown as "shared".
Figure 12: Manage Contexts
Advertisement
Table of Contents
