Mounting the azimuth elevation bracket onto the pole
Installing the SIM Card
The SIM card is usually installed by the Service Provider but if you have to install or
replace it, it is installed behind the SIM door as shown below. Push it in until it
clicks, or to remove it, push it in and release.
1. Slide the pole collar of the azimuth elevation bracket over the end of the pole
(see
Figure
33).
2. Leave the pole collar bolts loose to allow for azimuth adjustment during
pointing.
Important Note:
•
When installing or removing the SIM, do not touch the gold contacts.
Touching the contacts can introduce dirt or grease that could cause SIM
read errors.
Figure 33: Pole collar
Chapter 4 • Installation instructions
3500834-0001 Revision C
53