If the Enhanced Security feature is enabled, a link to the Enhanced Security page will
be displayed as shown in
Figure
24.
Figure 24: Enhanced Security page link
Enhanced Security Settings page
The Enhanced Security Page is used to configure local security for the unit.
Figure 25: Enhanced Security Settings page
For added security you can lock the UT so that it cannot be accessed locally. This is
controlled by a security password configured from the Enhanced Security Settings
page accessible from the Security Passwords page.
When the password is active, each time the UT starts up, the password must be
entered before the user interface can be accessed. All local IP ports are blocked, e.g.
so AT commands, and the upgrader cannot be used. User data can be sent if a PDP
context is up.
Chapter 2 • Configuration via Web UI
39
3500834-0001 Revision C