Chapter 2 • Configuration via Web UI
32
3500834-0001 Revision C
Ethernet Port page
The Ethernet Port settings page includes:
• Wake On LAN (see
Wake on LAN (any packet)
— Wake On LAN – On/Off radio button
— Wake On LAN idle timer – in minutes
— Wake On LAN time of day – 24 hour clock
• MAC Address filtering:
— Ethernet MAC Address filtering enable tick box
— Table of allowed Ethernet MAC addresses.
• Ethernet Operation: Duplex Mode
— In Default mode, the UT uses Half Duplex, except in Netmode PPPoE when
it automatically uses Full Duplex for operation with the Inmarsat NSD.
— Full or Half Duplex option can be used in the unusual case that the default
setting is not correct for your application.
Note that the UT does not support duplex negotiation and so Full Duplex can
only be used in the rare case that the TE device is also configured for Full
Duplex, no negotiation.
Figure 18: Ethernet Settings
section on page 46):