Table of Contents
Advertisement
Always On Context
• Always on context - On/Off (default is On)
• Always on static IP address. If the TE has a known static IP address or never
ARPs, enter this address. Alternatively, leave the IP address blank (0.0.0.0) and
the UT will set up a context for the first device it detects through ARP during
startup.
• APN drop down box. This includes the APNs configured on the Manage APNs
page and (in release 5.9.5.2 and above) the "Use a network assigned APN"
option. This option allows the network to assign the APN rather than the user
configuring it at the UT. It should only be used if this option is appropriately
configured at the network side.
Chapter 2 • Configuration via Web UI
3500834-0001 Revision C
37
Advertisement
Table of Contents
