Table of Contents
Advertisement
Interfaces
The Hughes 9502 has the following interfaces:
• Ethernet connection (RJ45)
• USB 1.1 connection (USB Type-B) for PC to configure terminal (requires
installation of Hughes USB driver. See www.bgan.hughes.com)
For use in Hazardous Locations, only connect a USB device
which is certified USB compliant to supply I
En cas d'utilisation dans un endroit dangereux, brancher
uniquement un périphérique USB certifié conforme USB pour
fournir un courant Imax de 0.5A
• Integrated GPS receiver and L-band antenna
• RS232 serial interface (DB9 male, DTE) to external NMEA 0183 based GNSS
device (e.g., GLONASS receiver). This port cannot be used for serial data.
• 3 LED status display and a single function button
• 3.5 mm stereo audio jack for audio tone or voltage level to assist in pointing
the terminal
• USIM card slot behind SIM door
Figure 7: Bottom view with end cap off
Figure 8: Top view with end cap off
0.5A
max
Chapter 1 • Product description
3500834-0001 Revision C
17
Advertisement
Table of Contents
