Table of Contents
Advertisement
Security Passwords
Chapter 2 • Configuration via Web UI
38
3500834-0001 Revision C
The security passwords page includes the following functions:
• Personalization Key to lock the UT to a particular USIM (SIM to Phone lock).
This is Off by default.
• Administration password – Off by default. Default password is admin
• SMS Remote Control – Off by default except in releases 5.9.4.3 through 5.9.5.3
where it is On by default.
• SMS Remote Password – default was remote but in 5.9.6.1 and above the
default is blank and a password must be entered when enabling SMS Remote
Control.
• Sender White-list – is a list of numbers that the terminal will allow a remote
SMS message to come from. When entering the number use the + symbol in
front of the country code e.g., +870 or just start with the country code e.g.,
870. Do not use 00 in front of the country code.
Figure 23: Security Passwords
Advertisement
Table of Contents
