Avertissement
Warning /
Installation of the Hughes 9502 (P/N 3500753-0022) must comply with NEC
Article 501 for Class I, Division 2, hazardous location.
This equipment is suitable for use in hazardous locations Class I, Division 2, Groups A,
B, C, D, or non-hazardous locations only
This equipment is suitable for use in hazardous locations ATEX Group II, Category 3,
as defined by the device marking;
L'installation du terminal Hughes 9502 (P/N 3500753-0022) doit être
conforme à l'article 501 NEC pour tout emplacement dangereux de type Classe I
Division 2.
Cet appareil convient a l'utilisation uniquement dans des emplacements de type
Classe I, Division 2, Groupes A,B,C,D, ou non-dangereux.
Cet appareil convient a l'utilisation uniquement dans des emplacements de type
ATEX Groupe II, Catégorie 3, comme indiqué par l'étiquettage:
Inspecting the parts
Optional installation items
Determining where to install the terminal
In order for your terminal to work correctly, the unit must be installed in a location
that provides a clear, unobstructed, line of sight to the satellite. Any objects such as
building structures or trees may degrade the quality of the satellite signal. To
determine where to install the unit, you need to determine that you have both a
Installation instructions
II 3G Ex ic IIC T5 Gc X
II 3G Ex ic IIC T5 Gc X
When opening the box, please carefully read the instructions before removing
the terminal. This is a specially designed box and if not handled correctly, the
box cannot be reused for shipment.
1. Basic Fix Mount Kit (P/N 3004066-0002)
2. Azimuth/elevation bracket for 1.5" pole (P/N 1022994-0022)
3. Azimuth/elevation bracket for 2" pole (P/N 1022994-0024)
Chapter 4
Chapter 4 • Installation instructions
3500834-0001 Revision C
49