Feature Management page
You can enable special features from this page:
SMS Remote Management allows the unit to receive and act on special remote
control SMS messages. This feature is on by default.
Enhanced Security allows you to lock the UT so that it can only be accessed locally
after entering a password. Refer to the
Enhanced Security Settings page
on page 39
below. When this feature is active, the remote SMS password will be stored
encrypted. When the feature is enabled a link to the Enhanced Security page
appears on the
Security Passwords
page (see page 38 below).
BGAN Services allows the unit to be converted to a unit that uses a BGAN SIM
rather than an M2M SIM.
With release 5.9.5.1 and above, the UT will automatically switch between M2M and
BGAN Services based on the type of SIM card. The Feature code is no longer
required.
In release 5.9.6.1 and above, Enhanced Security can be enabled and disabled
without a feature code. Simply select the required option and press "Act/Deact
Feature".
Figure 21: Feature management page
Chapter 2 • Configuration via Web UI
35
3500834-0001 Revision C