To Mount The Wga-680A On The Panel - KYOWA WGA-680A Series Instruction Manual

3-2. TO MOUNT THE WGA-680A ON THE PANEL

To mount the WGA-680A on the panel, prepare a panel according
to the specified panel cut dimensions as shown at the right.
Then, mount the WGA-680A by referring the following
procedures.
(1) Cut out the panel according to the panel cut dimensions.
(2) Loosen the screws on the WGA-680A rear and remove the
fitting metal.
(3) Set the WGA-680A into the panel frame as described in the right
figure.
(4) Set the fitting metal from the rear.
(5) Tighten the screws and firmly fix the WGA-680A.
Fitting metal
Fitting metal
12
IM-A-1048H
Screw
Screw