Numeric Value Registering Calibration; Pattern Function; Level Test Function; Updating Rate Of Displaying Values - KYOWA WGA-680A Series Instruction Manual

FUNCTION
SELECTING
MODE
F-19 The calibration-zero value
Numeric value (mV/V) is displayed.
registering Set the initial value of the transducer.
Press the SET key.
calibration
Then, the calibration-zero value is updated.
(Calibration
zero
registration)
F-20 The pre-set value is displayed.
Operation
pattern
Set the value and press the SET key.
F-21 The pre-set value is displayed.
Updating rate of
displaying
values
Set the value and press the SET key.
F-22
Level Test (See below figures)
signals
(1) Display additional function
(2) LEVEL TEST values
(3) LEVEL TEST ON/OFF
Key operation and WGA-680A movement
in SETTING mode
0: Pattern 0 (Initial value)
1: Pattern 1
2: Pattern 2
3: Pattern 3
0: 15.60 times/sec. (Initial value)
1: 7.80 times/sec.
2: 3.90 times/sec.
3: 1.95 times/sec.
4: 0.98 times/sec.
5: 0.49 times/sec.
6: 0.24 times/sec.
7: 0.12 times/sec.
0: Disable (Initial value)
1: Enable
Set the value and press the SET key.
Set the value and press
the SET key.
Range: 0 to ±99999 (Initial value: 1000)
0: LEVEL TEST OFF
(Initial value)
1: LEVEL TEST ON
Set the value and press the SET key.
45
IM-A-1048H
Functional description,
supplements
A function that re-sets the
calibration-zero value (a
standard zero point).
For details, see "4-4-3.
NUMERIC VALUE
REGISTERING
CALIBRATION".
Select comparator values
from 4 patterns.
For details, see
"4-6. PATTERN
FUNCTION".
This function sets the
updating-rate of the
measured displaying value.
For details, see "4-8.
UPDATING RATE OF
DISPLAYING VALUES".
For details, see "4-7.
LEVEL TEST
FUNCTION".
A function that turns
OFF/ON the Level Test
values, pre-set in the (1)
and (2).