3. CONNECTION
The WGA-120A does not include cables since the WGA-120A is an amplifier, designed to be used in a
system. The WGA-120A is able to mount by using 2 holes (φ4.5) on the fitting metal.
The WGA-120A is able to mount on the DIN rail by using Kyowa's DIN rail mounting plate (optional:
EDP-70).
3-1 TO FIX THE WGA-120A
3-1-1 To mount the WGA-120A onto the panel
To mount the WGA-120A onto the panel, prepare a panel according
to the specified panel cut dimensions as shown at the right. Then,
mount the WGA-120A by referring the following procedures.
① Cut out the panel by referring the panel cut dimensions.
Panel cut dimension:45.0
② Set the WGA-120A into the panel frame.
③ Tighten the screws (M4) and firmly fix the WGA-120A.
+1
+1
× 93.4
mm
0
0
-28-
Panel cut dimension