Rear Panel - KYOWA WGA-680A Series Instruction Manual

2-2. REAR PANEL

(4)
(5)
(7)
(8)
(2)
(1) Blank panel
(2) [Transducer]
terminals
(3) [ANALOG OUTPUT]
terminals
(4) [INPUT] terminals
(5) [OUTPUT] terminals
(6) [LINE IN] terminals
(AC model)
[DC IN] terminals
(DC model)
(7) Fitting metal
(8) Protective ground
terminal
Blank panel is for WGA-680A-00.
In the case of optional model, the panel is the slot of optional model. For details,
see separate volume of "INSTRUCTION MANUAL (FOR BCD/RS-232C/RS-
485/TEDS OPTIONS)" and "INSTRUCTION MANUAL (FOR CC-LINK
OPTION)".
A : Bridge excitation (+)
B : Bridge output (-)
C : Bridge excitation (-)
D : Bridge output (+)
E : Shield
To use the TEDS compatible transducer, see separate volume of "INSTRUCTION
MANUAL (FOR BCD/RS-232C/RS-485/TEDS OPTIONS)".
COM : Common
Vo : Voltage output terminal
Io : Current output terminal
COM : Common
1 : ZERO command
2 : HOLD command
3 : RESET command
COM : Common
1 : [HH] output (comparator-3 output)
2 : [HI] output (comparator-1 output)
3 : [OK] output
4 : [LO] output (comparator-2 output)
5 : [LL] output (comparator-4 output)
FG : GND terminal
N : AC power supply input terminal
L : AC power supply input terminal
FG : GND terminal
: DC power supply negative input terminal
: DC power supply positive input terminal
For mounting onto the panel.
Be sure to connect the GND terminal to the ground.
Red cable
White cable
Black cable
Green cable
Be sure to connect the GND terminal to the ground.
Be sure to connect the GND terminal to the ground.
10
IM-A-1048H
(6)
(1)
(3)
*Figure is AC model.