3. CONNECTION AND DEFAULT SETTING
3-1. PROCEDURES FOR MEASUREMENTS
This section describes necessary operations to be conducted prior to the actual measurements.
Section 3-2
Section 3-3
Section 3-4
Section 3-5
Section 3-6
To connect [ANALOG OUTPUT] terminals
Section 3-7
Chapter 4
To mount the WGA-680A on the panel
To connect transducers
To connect [INPUT] terminals
To connect [OUTPUT] terminals
To connect the power supply
OPERATIONS AND FUNCTIONS
Mount the WGA-680A on the panel.
Connect various transducers to the
WGA-680A.
Connect cables to the [INPUT] terminals.
Connect cables to the [OUTPUT] terminals.
Connect cables to the [ANALOG OUTPUT]
terminals.
Connect the AC power supply and ground the
GND terminal.
Operate the WGA-680A and measure data.
For details, see "4. OPERATIONS AND
FUNCTIONS".
11
IM-A-1048H