Service; Safety Information - Dräger BiliLux Instructions For Use Manual

12

Service

12.1

Safety information

WARNING
Risk due to inappropriately reprocessed products
The product may be contaminated with infectious agents.
► Before service is performed and before the product is sent back for repair,
reprocess the product in accordance with the chapter Reprocessing.
WARNING
Risk if service is not performed regularly
Wear and material fatigue of the components may lead to device failure and
malfunctions.
► Perform service at the specified intervals.
WARNING
Risk if service is not performed properly
Personal injury and property damage may occur if service is not performed
properly.
► Service must be performed by those target groups that are assigned to the
particular measure.
WARNING
Risk if service is not performed properly
If the device is connected to the power supply during service, there is a risk of
personal injury and property damage.
► Before performing service, disconnect the device from the power supply.
WARNING
Risk when the housing is being opened
Under the housing, there are live electrical components that may cause an electric
shock.
► The housing may only be opened by those target groups that are assigned to
that particular measure.
CAUTION
Risk of injury or damage to the device
If the device is assembled incorrectly, or parts/assemblies are not reinstalled after
cleaning or maintenance, the essential performance and/or basic safety of the
device may be compromised.
► Assemble the device according to the instructions for use.
Instructions for use BiliLux
Service
65