Dräger BiliLux Instructions For Use Manual page 78

Technical data
14.10.4 Electromagnetic Immunity
The medical device is intended for use in the electromagnetic environment
specified below. The user should ensure that it is used in such an environment.
Immunity test
ESD
IEC 61000-4-2
EFT
IEC 61000-4-4
Surge
IEC 61000-4-5
Power frequency
50/60 Hz
Magnetic field
IEC 61000-4-8
Voltage Dips/Drop-
out
IEC 61000-4-11
78
IEC 60601 test Compliance level Electromagnetic
level
± 8 kV contact ± 8 kV contact
± 15 kV air ± 15 kV air
± 2 kV Mains ± 2 kV Mains
± 1 kV I/Os ± 1 kV I/Os
± 1 kV Differential ± 1 kV Differential
± 2 kV Common ± 2 kV Common
30 A/m 30 A/m
100% dip for 0.5 100% dip for 0.5
cycle at 0 °, 45 °, cycle at 0 °, 45 °,
90 °, 135 °, 180 °, 90 °, 135 °, 180 °,
225 °, 270 °, and 225 °, 270 °, and
315 ° 315 °
100% dip for 1 100% dip for 1
cycle at 0 ° cycle at 0 °
60% dip for 5 60% dip for 5
cycles cycles
30% dip for 25/30 30% dip for 25/30
cycles cycles
(50 Hz/60 Hz) at 0 ° (50 Hz/60 Hz) at 0 °
Dropout: Dropout:
100% dropout 100% dropout
250/300 cycles 250/300 cycles
(50 Hz/60 Hz) (50 Hz/60 Hz)
environment
The floors should
be wood, concrete,
or ceramic tile. If
floors are covered
with synthetic mate-
rial, the relative
humidity should be
at least 30%.
Mains power quality
should be that of a
typical commercial
or hospital environ-
ment.
Mains power quality
should be that of a
typical commercial
or hospital environ-
ment.
Power frequency
magnetic fields
should be at levels
characteristic of a
typical location in a
typical commercial
or hospital environ-
ment.
Mains power quality
should be that of a
typical commercial
or hospital environ-
ment. If the user of
the BiliLux requires
continued operation
during power mains
interruptions, it is
recommended that
the BiliLux be pow-
ered from an unin-
terruptible power
supply or battery.
Instructions for use BiliLux