Reprocessing List; Reprocessing Procedures - Dräger BiliLux Instructions For Use Manual

11.4

Reprocessing list

Components Surface
disinfection
with cleaning
Phototherapy Yes
light
Spring arm Yes
Trolley Yes
Radiometer Yes
11.5

Reprocessing procedures

11.5.1 Validated reprocessing procedures
At the time of product-specific validation, the following reprocessing procedures
showed good material compatibility and effectiveness:
Procedure Agent
Surface Dismozon
disinfection with plus
cleaning
The effectiveness of the listed reprocessing procedures has been validated by
independent laboratories that are certified to the standard ISO 17025.
11.5.2 Disinfectants
Use disinfectants that are nationally approved and are suitable for the particular
reprocessing procedure.
11.5.2.1 Surface disinfectants
At the time of the test, the surface disinfectants listed in the following table showed
good material compatibility. They can be used in addition to the surface
disinfectants listed in the section "Validated reprocessing procedures".
The manufacturers of the surface disinfectants have verified at least the following
spectra of activity:
– Bactericidal
– Yeasticidal
– Virucidal or virucidal against enveloped viruses
Observe the specifications of the surface disinfectant manufacturers.
Other surface disinfectants are used at one's own risk.
Instructions for use BiliLux
Manual Machine
cleaning cleaning with
followed by thermal
disinfection by disinfection
immersion
No No
No No
No No
No No
Manufacturer Concentration Contact time
BODE Chemie 1.6%
Reprocessing
Steam Special
sterilization reprocessing
measures
No No
No No
No No
No No
Temperature
15 min —
61