Device Combinations; Emc Declaration - Dräger BiliLux Instructions For Use Manual

Technical data
14.9

Device combinations

This device can be operated in combination with other Dräger devices or with
devices from other manufacturers. Observe the accompanying documents of the
individual devices.
If a device combination is not approved by Dräger, the safety and the correct
functioning of the individual devices can be compromised. The operating
organization must ensure that the device combination complies with the applicable
editions of the relevant standards for medical devices.
WARNING
Risk of death or serious injury
All data that are transmitted via medical devices are for information only and should
not be used as the sole basis for clinical decisions.
WARNING
Risk of electric shock.
Any connected devices or device combinations not complying with the
requirements mentioned in these instructions for use can compromise the
functional integrity of the medical device and lead to an electric shock.
► Before operating the medical device, strictly comply with the instructions for use
of all connected devices or device combinations.
14.10

EMC Declaration

14.10.1 General information
The EMC compliance of the product has been evaluated with the external cables,
transducers, and accessories specified in the list of accessories. Other accessories
which do not affect EMC compliance may be used if no other reasons forbid their
use (see other sections of the instructions for use). The use of noncompliant
accessories can result in increased emissions or decreased immunity of the
medical device.
The medical device must only be used next to or stacked with other devices if this
configuration is approved by Dräger. If adjacent or stacked use of non-approved
configurations is inevitable, verify normal operation of the medical device in the
configuration in which it will be used. In any case, strictly observe the instructions
for use of the other devices.
14.10.2 Electromagnetic emissions
When using wireless networking, be aware that the system operates at 2.4-GHz
range. Other equipment, even if compliant with CISPR emission requirements, can
interfere with reception of wireless data. When selecting wireless systems (wireless
communication media, pager systems, etc.) for use in installations where wireless
networking is used, care must always be used to ensure that operating frequencies
are compatible. For example, selecting wireless communication media that operate
at 2.4 GHz will likely cause difficulty with the networking components. Low-level
76 Instructions for use BiliLux