Internal Ncs Module (Incs) 6Dr4004-5L / -5Le - Siemens SIPART PS2 Series Operating Instructions Manual

Installing/mounting
4.5 Installing option modules
4.5.6

Internal NCS module (iNCS) 6DR4004-5L / -5LE

Function
Wear-free, non-contacting position detection
Device features
①
②
③
Figure 4-19
Requirement
● The slot required for the internal NCS (iNCS) module in the rack is free. The following option
modules use the same slot in the rack:
– Digital I/O Module (DIO)
– Inductive Limit Switches (ILS)
– Mechanic Limit Switches (MLS)
– Internal NCS module
● The positioner is mounted, or is to be mounted, directly on the valve using the positioner
shaft.
68
Internal NCS module 6DR4004-5L.
Insulating cover, yellow
Ribbon cable of the internal NCS mod‐
ule
Installing the internal NCS module, schematic diagram
④
Adjustment wheel for the magnet clamp
⑤
Adjustment wheel for the friction clutch (without
function)
SIPART PS2 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E00074631-AE