Introduction
1.1
Purpose of this documentation
These instructions contain all information required to commission and use the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
1.2
Scope of documentation
Article no.
6DR50..
6DR51..
6DR52..
6DR53..
6DR5910-*
A5E00151560
6DR4004-6A / -8A
6DR4004-6F / -8F
6DR4004-6J / -8J
6DR4004-6G / -8G
6DR4004-6K / -8K
6DR4004-5L / -5LE
6DR4004-6N* / -8N*
6DR4004-1ES ... -4ES
6DR4004-1R / -2R / -1RN /
-2RN
6DR4004-8D and
TGX:16300-1556
6DR4004-8V / -8L / -8VK /
-8VL
6DR4004-1RJ/K/P/Q and
6DR4004-2RJ/K/P/Q
SIPART PS2 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E00074631-AE
Product
SIPART PS2, 2-wire (4 mA to 20 mA), without HART
SIPART PS2, 2-wire (4 mA to 20 mA), with HART
SIPART PS2, 2-wire, 3-wire, 4-wire (0/4 to 20 mA), with HART
SIPART PS2, 2-wire, 3-wire, 4-wire (0/4 mA to 20 mA), without HART
SIPART PS2 without basic electronics with Position Transmitter and
pneumatics unit
19" slide-in module with operating and control unit; 4 to 20 mA with 2-wire
connection
Digital I/O Module (DIO)
Analog Input Module (AIM)
Analog Output Module (AOM)
Inductive Limit Switches (ILS)
Mechanic Limit Switches (MLS)
Internal NCS module
NCS sensor
Position Transmitter
Pneumatic terminal strip
Installation for NAMUR part-turn actuators
Mounting kit for NAMUR linear actuator
Booster
1
13