Siemens SIPART PS2 Series Operating Instructions Manual page 319

Installing/mounting
Mounting of this positioner without basic electronics corresponds to the mounting of the
positioner in non-flameproof enclosure. Proceed as described in Section "Installing/mounting
(Page 37)".
Connecting
Connect the positioner as described in Section "Positioner without basic electronics 6DR5910
(Page 318)". Please also observe Basic safety instructions (Page 75) for connection.
Commissioning
Commission the positioner as described in Section "Commissioning (Page 105)".
Device view of positioner 6DR5910
①
②
③
④
⑤
⑥
SIPART PS2 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E00074631-AE
Output: Actuating pressure Y1
Input: Supply pressure PZ
Output: Actuating pressure Y2 (not for
6DR59..)
Restrictor Y1
Exhaust air outlet with a sound absorber
Transmission ratio selector
Positioner with remote control electronics
F.3 Positioner without basic electronics 6DR5910
⑦
Friction clutch adjustment wheel
⑧
Connecting terminals, positioner
⑨
Blanking plug
⑩
Cable gland
⑪
Wiring diagram on module cover
⑫
Purging air selector
319