Operating; Operating Elements; Display - Siemens SIPART PS2 Series Operating Instructions Manual

Operating

6.1

Operating elements

6.1.1

Display

Introduction
Note
Repetition rate display
When operated in temperature ranges below -10°C, the liquid crystal display of the positioner
becomes sluggish and the repetition rate display reduces considerably.
The display has two lines. These two lines are segmented differently. Each element in the
upper line has 7 segments, whereas that in the lower line has 14 segments. Contents of the
display depend on the selected mode.
Display options as per the mode
An overview of mode-specific display options is given below.
Operating mode
P manual mode
Initialization mode
Configuring
SIPART PS2 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E00074631-AE
Representation in the display Pos. Legend
①
Potentiometer setting [%]
②
Blinking indicator for the non-initialized status.
①
Potentiometer setting [%]
②
Display of the current status of initialization or a fault
message.
③
Indicator for ongoing initialization or a fault message.
①
Parameter value
②
Parameter name
③
Parameter number
6
95