Siemens SIPART PS2 Series Operating Instructions Manual page 304

Booster
E.2 Mounting a booster
B. Mounting the pressure gauge and connection block
1. Check whether the O-rings are in the pressure gauge block. There are two O-rings in the
single-acting version. There are three O rings in the double-acting version.
2. Fasten the pressure gauge block
screws, do not tighten them.
3. Fasten the connection block
the screws, do not tighten them.
304
⑥
with the screws
⑨ ⑩
with the screws ,
Operating Instructions, 11/2019, A5E00074631-AE
⑦ ⑧
and lock washers
⑫ ⑪
and lock washers
SIPART PS2 with 4 to 20 mA/HART
. Position the
⑬
, . Position