Siemens SIPART PS2 Series Operating Instructions Manual page 241

Construction
● On the linear actuator
● On the part-turn actuator
Weight, positioner without option modules or accessories
● 6DR5..0 Glass-fiber reinforced polycarbonate enclosure
● 6DR5.11 aluminum enclosure, only single-acting
● 6DR5..2 stainless steel enclosure
● 6DR5..3 aluminum enclosure
● 6DR5..5 aluminum enclosure, flameproof, rugged
● 6DR5..6 stainless steel enclosure, flameproof, rugged
Material
● Enclosure
6DR5..0 polycarbonate
6DR5.11 aluminum, only single-acting
6DR5..2 stainless steel
6DR5..3 aluminum
6DR5..5 aluminum, flameproof, rugged
6DR5..6 stainless steel enclosure, flameproof, rugged
● Pressure gauge block
Versions
● In the polycarbonate enclosure 6DR5..0
● In aluminum enclosure 6DR5.11
● In aluminum enclosures 6DR5..3 and 6DR5..5
● In stainless steel enclosures 6DR5..2 and 6DR5..6
Torques
● Part-turn actuator fixing screws DIN 933 M6x12-A2
● Linear actuator fixing screws DIN 933 M8x16-A2
● Gland pneumatic G¼
● Pneumatic gland 1/4-18 NPT
Without sealant
With sealant
● Cable glands
Screw-in torque for plastic gland in all enclosures
Screw-in torque for cable gland made of metal/stainless
steel in polycarbonate enclosure
Screw-in torque for metal/stainless steel glands in alumi‐
num/stainless steel enclosure
SIPART PS2 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E00074631-AE
Using mounting kit 6DR4004-8V and, where necessary, an
additional lever arm 6DR4004-8L on actuators according to
IEC 60534-6-1 (NAMUR) with a fin, columns, or a plane
surface.
Using mounting kit 6DR4004-8D or TGX:16300-1556 on
actuators with mounting plane according to VDI/VDE 3845
and IEC 60534-6-2: The required mount must be provided
on the actuator-side.
Approx. 0.9 kg (1.98 lb)
Approx. 1.3 kg (2.86 lb)
Approx. 3.9 kg (8.6 lb)
Approx. 1.6 kg (3.53 lb)
Approx. 5.2 kg (11.46 lb)
Approx. 8.4 kg (18.5 lb)
Glass-fiber reinforced polycarbonate (PC)
GD AISi12
Austenitic stainless steel 316Cb, mat. No. 1.4581
GD AlSi12
GK AISi12
Austenitic stainless steel 316L, mat. No. 1.4409
Aluminum AIMgSi, anodized or stainless steel 316
Single-acting and double-acting
Single-acting
Single-acting and double-acting
Single-acting and double-acting
5 Nm (3.7 ft lb)
12 Nm (8.9 ft lb)
15 Nm (11.1 ft lb)
12 Nm (8.9 ft lb)
6 Nm (4.4 ft lb)
4 Nm (3 ft lb)
6 Nm (4.4 ft lb)
6 Nm (4.4 ft lb)
Technical data
12.3 Construction
241