Commissioning; Basic Safety Instructions - Siemens SIPART PS2 Series Operating Instructions Manual

Commissioning

7.1

Basic safety instructions

Lever for position detection
Danger of crushing and shearing with mounting kits which use a lever for position detection.
During commissioning and ongoing operation, severing or squeezing of limbs could occur as
a result of the lever. Risk of injury when working on control valves due to the high operating
force of the pneumatic actuator.
● Do not reach into the range of motion of the lever following mounting of the positioner and
Improper commissioning in hazardous areas
Device failure or risk of explosion in hazardous areas.
● Do not commission the device until it has been mounted completely and connected in
● Before commissioning take the effect on other devices in the system into account.
See also
Basic safety instructions (Page 105)
Commissioning and operation with pending error
If an error message appears, correct operation in the process is no longer guaranteed.
● Check the gravity of the error.
● Correct the error.
● If the error still exists:
SIPART PS2 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E00074631-AE
WARNING
mounting kit.
WARNING
accordance with the information in Technical data (Page 239).
WARNING
– Take the device out of operation.
– Prevent renewed commissioning.
7
105