System Messages When Exiting The Configuration Mode; System Messages During Operation - Siemens SIPART PS2 Series Operating Instructions Manual

Diagnostics and troubleshooting
11.1 Output of system messages in the display
Message Line
Up Down
nn.n X
FINISH X
See also
System messages before initialization (Page 207)
11.1.3

System messages when exiting the Configuration mode

Remarks about the tables:
nn
/
Messages when exiting the configuration mode:
Message Line
Up Bot‐
tom
n.nn.nn- X
nn
X
Error X
SLnn
X
11.1.4

System messages during operation

Remarks about the tables:
nn
/
210
Meaning/cause
Initialization completed successfully with the
display of actuator travel or the actuator angle
Stands for variable numeric values
Error symbol
(slash): the texts on the left and right of the slash flash alternately
Operating mode
Automatic Manual mode
Stands for variable numeric values
Error symbol
(slash): The texts on the left and right of the slash flash alternately
Measure
1. Briefly acknowledge using
2. Leave configuration level with a long
press on the
Meaning / cause
P manual mode
Software version
Monotony interruption
of the free character‐
istic on the setpoint
turning point n
Operating Instructions, 11/2019, A5E00074631-AE
button.
button.
Measure
● Maintenance
● Correct the value
SIPART PS2 with 4 to 20 mA/HART