Metal core drilling
Fitting
9.5 Fitting the carbon brushes
Steps that must be completed:
-
Fitting the drill motor electronics
-
Fitting the stator
-
Fitting the connecting piece
-
Fitting the housing
-
Fitting the intermediate gearbox
Tools:
-
Assembly aid
-
Torx T15
3
1
4
5
C-SC_CSSM
1.
2.
3.
2
4
4.
5.
6.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Position the carbon brush (1).
Position the two plugs (2).
Position the spring (3).
Position the cover (4).
Screw in the screw (5).
Repeat steps 1 to 5 on the opposite side of the machine.
11.02.2019
Page 84 of 88