Setting The Guide - Fein KBU 35 PQ Repair Instructions

Metal core drilling
Fitting

9.6 Setting the guide

Tools:
- Torque wrench with hexagon socket fixture, 2.5 mm
- Socket head wrench, 2.5 mm
- 2 x plastic hammer
2
Photo shows similar
product
60°
Photo shows similar
product
C-SC_CSSM
1.
1
2.
Note the sequence.
Tighten the set screws from top to bottom.
3.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Move the drill motor (1) into the upper position.
Tighten the top three set screws (2) [1.4 Nm].
I
NFORMATION
Turn the tightened set screws 60° anticlockwise.
11.02.2019 Page 85 of 88