Fitting The Gearbox Parts - Fein KBU 35 PQ Repair Instructions

Metal core drilling
Fitting

9.1.4 Fitting the gearbox parts

Steps that must be completed:
- Fitting the shaft
- Positioning the shaft
- Fitting the gear-wheels
Tools:
- Circlip pliers
- Arbor press
- Sleeve 10 mm inner diameter
24 mm outer diameter
- Combination pliers
1
2 3 4
5
C-SC_CSSM
1.
2.
3.
4.
5.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Press in the grooved ball bearings (1).
Insert the gear-wheel (2).
Insert the gear-wheel (3).
Fit the circlip (4).
Insert the gear-wheel (5).
11.02.2019 Page 52 of 88