Metal core drilling
Fitting
9.1.2 Positioning the shaft
Steps that must be completed:
-
Fitting the shaft
Tools:
-
7 mm socket wrench
-
Arbor press
-
Circlip pliers
1
4
C-SC_CSSM
1.
2.
3.
4.
2
3
5.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Fit the two sealing rings (1).
Apply a layer of grease to the two sealing rings (1).
Screw in the hose socket (2).
Fit the sleeve (3).
Press in the shaft (4).
11.02.2019
Page 49 of 88