Fitting The Drill Motor - Fein KBU 35 PQ Repair Instructions

Metal core drilling
Fitting

9.3.7 Fitting the drill motor

Steps that must be completed:
- Fitting the guide
Tools:
- Socket head wrench, 4 mm
1
Photo shows similar
product
3
Photo shows similar
product
C-SC_CSSM
1.
2.
2
3.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Place the pressure piece (1) in the correct position.
Slide the drill motor (2) into the guide.
Screw in the two levers (3).
11.02.2019 Page 79 of 88