Fitting The Guide - Fein KBU 35 PQ Repair Instructions

Metal core drilling
Fitting

9.3.3 Fitting the guide

Tools:
- Socket head wrench, 2.5 mm; 3 mm; 4 mm
- Torx T10
- PH2 cross-tip screwdriver
C-SC_CSSM
1.
2.
3.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Place the pressure piece (1) in the correct position.
Position the guide strip (2) and press it onto the housing.
Insert the six cylinder head screws.
11.02.2019 Page 71 of 88