Metal core drilling
Removal
8
Removal
8.1 Removing the carbon brushes
Tools:
-
Torx T15
-
Assembly aid
1
2
3
5
C-SC_CSSM
1.
2.
3.
4.
5.
6.
4
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Unscrew the screw (1).
Remove the cover (2).
Lift up the spring (3).
Pull off the two plugs (4).
Remove the carbon brush (5).
Repeat steps 1 to 5 on the opposite side of the machine.
11.02.2019
Page 14 of 88