GWP 10
7. Fitting
Fitting the gearbox
1
1. Press the gear-wheel [z=30] (1) onto the shaft [z=8].
Press on the gear-wheel up to the relief groove (2).
C-SC_CSSM
Version 1.0
2
2016-02-02
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Tools:
- Arbor press
- Punch 6 mm
- Sleeve
7 mm inner diameter
30 mm outer diameter
Page 23 of 39