Removing The Gearbox Parts - Fein KBU 35 PQ Repair Instructions

Metal core drilling
Removal

8.5.2 Removing the gearbox parts

Steps that must be completed:
- Removing the electronics
- Removing the drill motor
- Removing the gearbox housing
Tools:
- Drawing-off socket cap
- Chuck cone 24 mm
- Combination pliers
- Circlip pliers
- Slide hammer
- Inner puller
1
2
5
6
7
C-SC_CSSM
1.
3
2.
3.
4.
4
5.
6.
7.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the seal (1).
Remove the two straight pins (2).
Pull off the grooved ball bearing (3).
Remove the gear-wheel (4).
Remove the circlip (5).
Remove the gear-wheel (6).
Remove the gear-wheel (7).
11.02.2019 Page 43 of 88