Removing The Guide - Fein KBU 35 PQ Repair Instructions

Metal core drilling
Removal

8.2.7 Removing the guide

Steps that must be completed:
- Removing the electronics
- Removing the drill motor
Tools:
- Socket head wrench, 4 mm; 2.5 mm; 3 mm
- PH2 cross-tip screwdriver
- Torx T10
1
2
3
C-SC_CSSM
1.
2.
3.
4.
5.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Unscrew the screw (1).
Move the guide upwards using the spider.
Remove the guide.
Unscrew the screw (2).
Unscrew the flat headed screw (3).
11.02.2019 Page 23 of 88