Metal core drilling
Removal
8.4.5 Removing the connecting piece
Steps that must be completed:
-
Removing the carbon brushes
-
Removing the electronics
-
Removing the drill motor
-
Removing the gearbox housing
-
Removing the intermediate gearbox
-
Removing the housing
Tools:
-
Torx T20
2
3
3
C-SC_CSSM
1
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1.
Remove the connecting piece (1).
2.
Remove the felt piece (2).
3.
Remove the connecting piece (3).
11.02.2019
Page 34 of 88