Metal core drilling
Removal
8.5.4 Removing the shaft
Steps that must be completed:
-
Removing the electronics
-
Removing the drill motor
-
Removing the gearbox housing
-
Removing the holder
Tools:
-
Circlip pliers
-
Arbor press
-
Sleeve 44 mm inner diameter
55 mm outer diameter
1
2
C-SC_CSSM
1.
2.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Remove the circlip (1).
Press out the shaft (3).
11.02.2019
Page 46 of 88