Advertisement
KBE 35 N24; Holemaker III
7. Assembly
Fitting the drill shaft
2
1
1. Place the circlip (1).
2. Press on the grooved ball bearing (1).
3. Fit the circlip (2).
C-SC_CSSM
Version 1.0
3
2019-02-15
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Tools:
- Arbor press
- Sleeve 26 mm inner
diameter
42 mm outer diameter
- Circlip pliers
Page 33 of 61
Advertisement
