Metal core drilling
Removal
8.4.4 Removing the housing
Steps that must be completed:
-
Removing the carbon brushes
-
Removing the electronics
-
Removing the drill motor
-
Removing the gearbox housing
-
Removing the intermediate gearbox
Tools:
-
Torx T20
-
Blade
1
2
C-SC_CSSM
3
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1.
Remove the air guide ring (1).
2.
Cut up the information sign.
3.
Unscrew the five screws (2).
4.
Remove the motor housing (3).
11.02.2019
Page 33 of 88